The rotary table is powered by an electric motor from the mobility scooter, the tilt of the table is driven by the wiper motor from the Audi A8 B4.
I powered the engines with a 24v / 12v 16.7A two channel power supply, I used a 40A voltage regulator to set the rotation speed of the table top.
The table top has a diameter of 800 mm and a thickness of 8 mm, thanks to which the table's capabilities are very large, the table can be used as a welding positioner, as an assembly table or a plasma cutting table, Repair work can be done on the table, and thanks to the electrically adjustable table top, the work is less strenuous.
Comment: I built something like this. I made oilfield parts that needed many rings from, 12, 22 and 50mm steel plate. You can order disks from steel supplier and cut out the centers cheaper than you can order rings. I drilled a centering hole and piercing hole and used oxy/propane to cut. I would buy a dewar of liquid oxygen that cut all I could before it off gassed.